About This Document; Personnel Qualifications; Subject To Change - Wilo Actun FIRST SPU 4 Instrucciones De Instalación Y Funcionamiento

INTRODUCTION
1 Introduction

1.1 About this document

The language of the original operating instruc-
tions is German. All other languages of these
instructions are translations of the original oper-
ating instructions.
If a technical modification is made to the designs
named there without our agreement, this decla-
ration loses its validity.
1.2 Personnel qualifications
All personnel who work on or with the device
must be qualified for such work; electrical work,
for example, may only be carried out by a qualified
electrician. All personnel must be of legal age.
National accident prevention regulations must
also be observed as a basis by the operating and
maintenance personnel.
It must be ensured that personnel have read
and understood these installation and operating
instructions, if necessary, this manual must be
ordered from the manufacturer in the required
language.
This product is not intended for use by persons
(including children) with limited physical, sensory
or mental capacities or without the relevant
experience or knowledge, unless they are super-
vised by a person responsible for their safety and
receive instructions from this person on how to
use the pump.
Children must be supervised in order to ensure
that they do not play with the pump.
1.3 Copyright
These installation and operating instructions have
been copyrighted by the manufacturer. These in-
stallation and operating instructions are intended
for use by installation, operating and mainte-
nance personnel. It contains technical regulations
and drawings which may not be reproduced or
distributed, either completely or in part, or used
for purposes of competition, or shared with oth-
ers without the express consent of the manufac-
turer. The illustrations used may differ from the
original and are only intended as an exemplary
representation of the pumps.

1.4 Subject to change

The manufacturer reserves the right to make
technical modifications to systems and/or
components. These installation and operating
instructions refer to the pump shown on the title
page.
1.5 Warranty
In general, the specifications in the current "Gen-
eral Terms and Conditions" apply to the warranty.
You can find these here: www.wilo.com/legal
Any deviations must be contractually agreed and
shall then be given priority.
Installation and operating instructions Wilo-Actun FIRST SPU 4
1.5.1 General
The manufacturer is obliged to correct any de-
fects found in the pumps it sells, provided that
the following points have been fulfilled:
• The quality defects are caused by the materials
used or the way the product was manufactured or
designed.
• The defects were reported in writing to the man-
ufacturer within the agreed warranty period.
• The pump was used only as prescribed.
1.5.2 Warranty period
The duration of the warranty period is stipulated
in the "General Terms and Conditions".
Any deviations must be contractually agreed!
1.5.3 Spare parts, add-ons and modifications
Only genuine spare parts from the manufacturer
may be used for repairs, replacements, add-ons
and modifications. Unauthorised add-ons and
modifications or the use of non-genuine spare
parts can seriously damage the pump and/or
injure personnel.
1.5.4 Maintenance
The prescribed maintenance and inspection
work should be carried out regularly. This work
may only be carried out by qualified, trained and
authorised personnel.
1.5.5 Damage to the product
Damage and faults that endanger safety must
be rectified immediately and properly by trained
personnel. The pump may only be operated if it is
in perfect working order.
In general, repairs should only be carried out by
Wilo customer service!
1.5.6 Exclusion of liability
No warranty is granted and no liability is accepted
for damage to the pump chamber if one or more
of the following points apply:
• Inadequate configuration by the manufacturer
due to insufficient and/or incorrect information
provided by the operator or customer
• Non-compliance with safety instructions and
work instructions as specified in these installation
and operating instructions
• Improper use
• Incorrect storage and transport
• Improper installation/dismantling
• Insufficient maintenance
• Incorrect repairs
• Inadequate construction site or construction work
• Chemical, electrochemical and electrical influ-
ences
• Wear
This means the manufacturer's liability excludes
all liability for personal injury, material damage or
financial losses.
English
5