Honda NSS250 Manual Del Propietário página 353

03/12/18 15:33:40 3CKPB610_065
IDLE STOP (NSS250A)
Function of the Idle Stop System
The purpose of the idle stop system is to
improve fuel economy and to reduce
exhaust emissions and noises by stopping
the engine automatically while waiting at
the intersection (Idle Stop).
T he idle stop system comes into
operation when the throttle closed and
the scooter brought to a complete stop.
The standby indicator will flash to
indicate that the idle stop system is
operation.
The engine can be restarted by opening
the throttle.
The idle stop operation can be cancelled by
moving the idle stop switch to the IDLING
position.
Operating Condition of the Idle Stop
System
In order for the idle stop system to function
properly, the following conditions must be
met.
Before starting to ride the scooter.
1.
Warm up the engine to the operating
temperature. The idle stop system will
not function when the engine is cold.
Set the idle stop switch to the IDLING
STOP position.
Assume a proper posture on the seat. The
system will not function when the seat is
.
not loaded with weight properly.
R ide t he scoot er at speed higher t han
10 km/h.
.
55