button
7
Press this button can select up & down swing angle. Fan blow angle can be selected
circularly as below:
(horizontal louvers stops
at current position)
•
When selecting
automatically swing up & down at maximum angle.
•
When selecting "
Horizontal louver will stop at the fixed position.
•
When selecting "
louver will send air at the fixed angle.
•
Hold
button above 2s to set your required swing angle. When reaching your required
angle, release the button.
NOTE:
•
conditioner will blow fan automatically.
•
Press this button continuously more than 2s, the main unit will swing back and forth from
up to down, and then loosen the button. The unit will stop swinging and present position
of guide lover will be kept immediately.
•
Under swing up and down mode, when the status is switched from off to
button again 2s later,
within 2s, the change of swing status will also depend on the circulation sequence stated
above.
SLEEP button
8
In the Cooling or Heating mode, press this button to start Sleep mode. Once you set
it up, this symbol
three places to choose from, Sleep Mode 1, Sleep Mode 2, Sleep Mode 3. To navigate
through the options, press the sleep button. By pressing it once Sleep Mode 1
will be activated, by pressing it twice Sleep Mode 2
Sleep Mode 3
function and "
will be deactivated. During DRY, FAN, AUTO, Energy Saving & "8°C Heating" functions,
Sleep mode is not available.
Sleep Mode 1
Sleep Mode 1
function, the air conditioner's temperature increases by one degree per hour in
"Cooling" mode and decreases by one degree per hour in "Heating" mode.
No display
, air conditioner is blowing fan automatically. Horizontal louver will
" , air conditioner is blowing fan at fixed angle. Horizontal
,may not be available. When air conditioner receives this signal, the air
status will switch to off status directly. lf press this button again
appears on the screen remote control. Sleep Mode has
activates. Pressing the button for the fourth time will disable this
" will disappear. If you deactivate the air conditioner, sleep mode
is available in Cooling or Heating mode. By activating this
" , air conditioner is blowing fan at fixed position.
16
, if press this
activates, three times
GB