Clean Filter - Toyotomi TRG-828ZR Manual De Usuario

Ocultar thumbs Ver también para TRG-828ZR:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Clean and Maintenance

Clean filter

1 OPEN PANEL
Pull out the panel to a certain
angle as shown in the fig.
2 REMOVE FILTER
Remove the filter as indicated
in the fig.
WARNING:
The filter should be cleaned every three months. If there is much dust in the operation
environment, clean frequency can be increased.
After removing the filter, do not touch fins to avoid injury.
Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard.
3 CLEAN FILTER
• Use dust catcher or water to
clean the filter.
• When the filter is very dirty,
use the water (below 45 ºC ) to
clean it, and then put it in a
shady and cool place to dry.
4 INSTALL FILTER
Install the filter and then close
the panel cover tightly.
26
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido