9
I SENSE button
Press this button to start I SENSE function and
controller. After this function is set, the remote controller will send the detected
ambient temperature according to the controller and the unit will automatically
adjust the indoor temperature according to the detected temperature. Press this
button again to cancel I SENSE function and
USEFUL TIP
Please put the remote controller near user when this function is set. Do not put the
remote controller near the object of high temperature or low temperature in order
to avoid detecting inaccurate ambient temperature. When I SENSE function is turned
on, the remote controller should be put within the area where indoor unit can receive
the signal sent by the remote controller.
TIMER ON / TIMER OFF button
10
TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button,"
icon disappears and the word "ON" on remote controller blinks. Press " " or " "
button to adjust TIMER ON setting. After each pressing " " or " " button, TIMER ON
setting will increase or decrease 1 minute. Hold " " or " " button, 2s later, the time will
change quickly until reaching your required time. Press "TIMER ON" to confirm it.
The word "ON" will stop blinking. "
Under the condition that TIMER ON is started up, press "TIMER ON" button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer on. After pressing this button, "
icon disappears and the word "OFF" on remote controller blinks. Press " " or " "
button to adjust TIMER OFF setting. After each pressing " " or " " button, TIMER OFF
setting will increase or decrease 1 minute. Hold " " or " " button, 2s later, the time
will change quickly until reaching your required time. Press "TIMER OFF" to confirm it.
The word "OFF" will stop blinking. "
Under the condition that TIMER OFF is started up, press "TIMER OFF" button to cancel it.
will be displayed on the remote
will disappear.
" icon resumes displaying. Cancel TIMER ON:
" icon resumes displaying. Cancel TIMER OFF:
19
"
"
GB