El Corte Inglés VT-90 Manual De Instrucciones página 25

PARTS OF THE FAN
1. Remote Control Compartment with Control Panel
2. LCD Display
3. Grille
4. Base
5. Remote Control
ASSEMBLY INSTRUCTIONS
Check contents – keep packaging and user instructions for future reference.
NOTE: For shipping purposes, the support column and the base both have 2 separate halves which
need to be assembled.
STEP 1:
Assemble the base by finding
the two half-circle plastic pieces
and sliding them together so that
they interlock.
STEP 2:
Affix the base onto the assembly completed in
Step 3 in a similar fashion. Hold the base upright
(the side with a smooth surface) and thread the
power cord through the center hole. Bring it up
to meet the extension column and ensure that
the screw holes on both are aligned. Secure
together with screws provided. If using without
the extension column, attach directly to main fan
body.
CAUTION: This fan must operate in the upright position only. do not lay fan on its side or in any other
position. doing so may cause damage to the fan and/or personal property. do not use this fan without
its base.
How to use：
1. Remove the cable tie and unravel the cord set before operation.
2. Do not use outdoors.
3. Use the stop button to choose a fixed airflow direction for personal comfort or the oscillating function
(if featured) for larger areas.
4. Plug fan into a 220-240v, 50-60Hz outlet and follow the operating instructions:
The control panel and the remote of this fan are equipped with an LCD display and 6 functions (Power,
Speed, Oscillation, Timer+, Timer- and Mode). For your convenience, the buttons on the remote are
designed to function in the same way as the keys on the control panel. The LCD display has lights that
illuminate to indicate the fan's active functions.
TV-90.indd 23
23
12/29/2015 5:17:11 PM