TOP CONTROL PANEL
LCD DISPLAY
Guidelines for using the remote control
The remote control must be pointed towards the receiver on the fan in order to work.
●
The remote control may not operate in a room where heavy machine is operating.
●
Do not block the line of sight between the remote control and the receiver.
●
Handle the remote control with care. Do not drop the remote control on the floor or bang it
●
against hard objects.
Guidelines for use of batteries
If the remote control will not be used for a long period of time, remove the batteries from the
●
battery compartment.
The remote control uses two AAA batteries, both of which should be new and replaced at the
●
same time when they run out.
Clean battery contacts and also those of the device prior to battery installation
●
Ensure the batteries are installed correctly with regard to polarity, matching +/- sides of the battery
●
to corresponding indications on the remote control.
Remove used and dead/discharged batteries promptly.
●
SPECIFICATION
Voltage: 220-240V~50/60Hz
Watt: 45W
Timer: 12 hours
Maximum fan flow rate (F)
Fan power input (P)
Service value (SV)
Standby power consumption (PSB)
Fan sound power level (LWA)
Maximun air velocity (c)
Measurement standard for service valne
Contact details for obtaining more information
TV-90.indd 25
30.13 m3/min
44.4 W
0.68(m3/min)/W
0.312W
57.0dB(A)
3.07 meters/sec
GB/T 13380-2007/ IEC60879:1986
El Corte Ingles, S.A.
HERMOSILLA, 112
28009 MADRID España/Espanha/Spain.
25
12/29/2015 5:17:11 PM