Bluetooth; Information For Using Bluetooth® Devices; Connecting Bluetooth Devices - JVC KW-V50BT Manual De Instrucciones

Monitor con receptor de dvd
Ocultar thumbs Ver también para KW-V50BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BLUETOOTH

Information for using Bluetooth®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such
as mobile phones, portable PCs, and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Notes
• While driving, do not perform complicated
operations such as dialing numbers, using the
phone book, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
Bluetooth Information: If you wish to receive
more information about Bluetooth, visit the
following JVC web site:
<http://www.jvc.net/cs/car/>
Bluetooth profile
This unit supports the following Bluetooth profiles:
• HFP (Hands-Free Profile) 1.6
• A2DP (Advanced Audio Distribution Profile) 1.2
• AVRCP (Audio/Video Remote Control Profile) 1.4
• GAP (Generic Access Profile)
• PBAP (Phone Book Access Profile) 1.0
• SDP (Service Discovery Profile)
• SPP (Serial Port Profile) 1.1
About mobile phones compatible with Phone
book Access Profile (PBAP)
If your mobile phone supports PBAP, you can
display the phone book and call lists on the touch
panel screen when the mobile phone is connected.
• Phone book: up to 600 entries
• Dialed calls, received calls, and missed calls: up
to 10 entries each

Connecting Bluetooth devices

❏ Registering a new Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, pair the unit and the device. Pairing
allows Bluetooth devices to communicate with each
other.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1: You can pair the
device and the unit using SSP (Secure Simple
Pairing) which only requires confirmation.
– For devices with Bluetooth 2.0: You need to
enter a PIN code both on the device and unit for
pairing.
• Once the connection is established, it is registered
in the unit even if you reset the unit. Up to 5
devices can be registered in total.
• Two devices for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• To use the registered device, you need to connect
the device to the unit. (Page 37)
Auto p airing
When <Auto Pairing> is set to [ON], iPhone is
automatically paired when connected via USB.
(Page 42)
Pairing a Bluetooth device using SSP (for
Bluetooth 2.1)
When the Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from an
available device.
1
Search the unit ("KW-V****") from your
Bluetooth device.
2
Confirm the request both on the device
and the unit.
123456
OK
• Press [Cancel] to reject the request.
ENGLISH
35

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kw-v30bt

Tabla de contenido