Installation - PRESIDENT HARRY II Manual Del Usuario

Ocultar thumbs Ver también para HARRY II:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Welcome to the world of the new generation of CB radios. The
new PRESIDENT range gives you access to top performance CB
equipment. With the use of up-to-date technology, which guar-
antees unprecedented quality, your PRESIDENT HARRY II ASC is a
new step in personal communication and is the surest choice for
the most demanding of professional CB radio users. To ensure that
you make the most of all its capacities, we advise you to read
carefully this manual before installing and using your PRESIDENT
HARRY II ASC.
A) INSTALLATION:
1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO:
a)You should choose the most appropriate setting from a simple and practical point of
view.
b) Your CB radio should not interfere with the driver or the passengers.
MOUNTING
DIAGRAM
c) Remember to provide for the passing and protection of different wires (e.g. power,
antenna, accessory cabling) so that they do not in any way interfere with the driving
of the vehicle.
d) To install your equipment, use the cradle (1) and the self-tapping screws [2] provided
(drilling diameter 3.2 mm). Take care not to damage the vehicle's electrical system
while drilling the dash board.
e) Choose where to place the microphone support and remember that the micro-
phone cord must stretch to the driver without interfering with the controls of the
vehicle.
- N.B. : As the transceiver has a frontal microphone socket, it can be set into the dash
board. In this case, you will need to add an external loud speaker to improve the
sound quality of communications (connector EXT.SP situated on the back panel: C).
Ask your dealer for advice on mounting your CB radio.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido