Charging The Battery - Invacare Aquatec ORCA Manual Del Usuario

Ocultar thumbs Ver también para Aquatec ORCA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
4. Hold the backrest at the center of the head end and
carefully lift it into the end position.
5. Plug the jack socket with the unlocking sleeve C
on the spiral cable B of the hand control A to the
jack plug D until the locking mechanism engages
noticeably.
IMPORTANT!
Risk of damage
– Make sure that the backrest doesn't touch the
bath tub edge.
– Place the bath lift further forwards in the bath
tub, if necessary.

3.4 Charging the battery

The bath lift cannot be used when the battery is charging.
1574469-B
Pre-release Rev. B.00
WARNING!
Risk of electric shock
– Only recharge the battery in dry rooms at room
temperature (15 °C to 25 °C) and never in the
bathroom.
IMPORTANT!
– Only use the charger supplied to charge the
battery in the hand control.
– Only connect the charger to the mains when
the hand control is connected to the charger.
– Make sure that the voltage specifications
shown on the charger correspond to those of
the mains supply.
A
F
E
1. Insert the jack plug F of the charger C into the jack
socket E on the spiral cable D of the hand control A
until it engages.
2. Insert the mains plug B of the charger into a power
socket.
B
G
C
D
Setup
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Aquate orca fAquate orca xl

Tabla de contenido