Transport; Safety Information; Removing The Bath Lift - Invacare Aquatec ORCA Manual Del Usuario

Ocultar thumbs Ver también para Aquatec ORCA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
Aquatec® ORCA / ORCA F / ORCA XL

5 Transport

5.1 Safety information

CAUTION!
The backrest is not locked on the seat when it is
folded together and can come apart.
– Do not remove the suction cups when
transporting the bath lift.
– Remove the hand control from the backrest
for transport.
– Refer to the storage and shipping conditions in
section 9.4 Environmental Parameters, page 26.
1. Remove the hand control.
2. Disassemble the bath lift into two sections for transport
(seat and backrest), → 5.2 Removing the bath lift, page
18.

5.2 Removing the bath lift

1. Let the water out of the bathtub.
2. Lower the bath lift using the Down button until the
backrest stops in the lowered end position, → 4.2
Controlling the bath lift, page 15.
18
Pre-release Rev. B.00
3. Unlock the jack socket on the spiral cable of the hand
control by pushing up the unlocking sleeve and pull it
off the jack plug.
IMPORTANT!
Risk of damage
– When folding the backrest down, ensure
that spiral cable of the hand control does
not become trapped.
– Do not fold the backrest down if there is
water in the bathtub.
4. Hold the backrest at the head end with one hand and
fold it forwards to the end position.
5. Pull the backrest up off the seat and out of the bathtub.
1574469-B

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Aquate orca fAquate orca xl

Tabla de contenido