Hemming With The Cover Stitch; Free Arm Hemming - Janome Cover Pro 900cp Manual De Instrucciones

Janome 900cp Instruction Manual
w
q
www.toews.com

Hemming with the Cover Stitch

z Fold up the edge of the fabric to the wrong side and
e
x Draw a line with a tailor's chalk on the right side of the
c Place the fabric so the left needle drops just to the
v Sew carefully along the marked line.
r
b After finishing sewing, raise the presser foot and
n Draw the needle threads to the wrong side of the

Free Arm Hemming

The extension table can be detached for free arm
hemming on the tubular parts of the garments, such as
sleeves, cuffs etc.
z Detach the extension table (see page 8).
x Stitch the hem in the same way as hemming with
c Continue to sew over the stitches 2" (4 to 5 cm)
36
press.
fabric to mark the fabric edge.
left side of the marked line. Lower the presser foot.
remove the fabric to the rear.
fabric and knot them together.
q Marked line
w Left needle
e Right needle
r Right side of the fabric
cover stitch.
beyond the beginning of the seam and stop the
machine.
Cut the threads at the beginning and at the end.
900cp Owners Manual/ User Guide