Finishing The Seam - Janome Cover Pro 900cp Manual De Instrucciones

Janome 900cp Instruction Manual
w
e
t
r
www.toews.com

Finishing the Seam

To achieve the best results, use a piece of scrap fabric at
q
the beginning and end of the seam.
Beginning of the seam
z Raise the presser foot and insert a piece of scrap
fabric under the foot. Lower the foot and turn the
handwheel several times toward you.
Depress the foot control to start sewing slowly.
q Handwheel
x Stop sewing at the end of the scrap fabric.
Insert the work fabric after the scrap as shown, then
start sewing on the work fabric.
w Scrap fabric
e Work fabric
End of the seam
c Stop sewing at the end of the work fabric.
Insert another piece of scrap fabric after the work
fabric as shown, then sew through the scrap.
r Another scrap fabric
v Cut the connecting threads between the work fabric
and scrap fabric.
t Connecting threads
Knotting the threads
Draw the needle threads to the wrong side of the
fabric by using a pair of tweezers and knot them together.
32
900cp Owners Manual/ User Guide