Declaration Of Incorporation - RK Rose+Krieger DuoLine S Clean Instrucciones De Montaje

1. Declaration of Incorporation

1. Declaration of Incorporation 1. Declaration of Incorporation
1.1 Declaration of Incorporation
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
32423 Minden, Germany
Description and identification of the partly completed machine.
Product/manufacture:
Type:
Serial number:
Project number:
Order:
Function:
The following basic requirements of Machinery Directive 2006/42/EC as set forth in Appendix I
are applied and fulfilled:
1.1.5.; 1.3.; 1.3.2.; 1.3.4.; 1.3.7.; 1.3.8.; 1.3.9.; 1.6.1.; 1.6.3.
Moreover, we declare that the special technical documents have been created according to
Annex VII Part B.
40 40 40
The person in the community that is authorised to compile the rele-
vant technical documents.
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Straße 9
32423 Minden, Germany
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
Technical description:
A rotational movement is transformed by means of a timing belt into a li-
near positioning movement of the guide slide. The top opening of the gui-
de profile is covered by the timing belt (optionally with additional masking
tape) so that the guide unit is protected against soiling.