Skil CR540601 Manual Del Propietário página 17

Saw-Line Window (Fig . 8)
For a 0° cut, align your line of cut with the left
notch in the foot at the 0° indicator.
For 45° bevel cuts, align your line of cut with
the right notch at the 45° indicator.
The saw-line window is also adjustable by
loosening the screw and realigning the window,
according to your need.
The saw-line window will give an approximate
line of cut. Make sample cuts in scrap lumber
to verify the actual line of cut. This will be
helpful because of the number of different
blade types and thicknesses available. To
ensure minimum splintering on the good side
of the material to be cut, face the good side
down.
Extension for Vacuum Cleaner
(Fig . 9)
Your tool is equipped with an extension (Ø1-
1/4'') for connecting a vacuum cleaner.
Choose a suitable vacuum-cleaner hose or use
an adapter, if necessary.
WARNING
with the lower guard or cutting operation.
Never allow a vacuum-
cleaner hose interfere
Fig. 8
0° Indicator
Screw
Fig. 9
45° Indicator
17