Sound Settings; Using The Virtual Surround/Sound Retriever; Adjusting The Bass And Treble; Resetting The System - Pioneer X-SMC5-K Manual De Instrucciones

13 Changing the settings

Sound settings

Using the Virtual Surround/Sound Retriever

You can add exciting effects to audio sources.
1 Press SOUND to select Virtual Surround or
Sound Retriever.
Use / to select On or Off, then press
2
ENTER.
About Sound Retriever
This function enhances sound data lost during compression
of MP3 and other file types, allowing the user to enjoy sound
quality closer to that of the original signal data.

Adjusting the bass and treble

Use the bass and treble controls to adjust the overall tone.
1 Press SOUND to select Bass or Treble.
Use / to adjust the bass or treble, then
2
press ENTER.
You can adjust low and high sounds on a scale of –5 to +5
(eleven steps).

Resetting the system

Use this procedure to reset all system settings to the factory
default.
Important
• Disconnect all components connected to this unit
before the operation.
1 Press STANDBY/ON.
The unit turns on.
Press and hold  and STANDBY/ON on
2
the top panel for three seconds.
The unit turns off (standby mode).
All the settings will be reset to the factory default next time the
unit is turned on.
40
En