Control Panel; Display Icons Key - Dal Zotto BEATRICE Manual Del Usuario

CONTROL PANEL

BUTTON
ON/OFF
1
2
3
ADJUSTMENT
OPERATING POWER

DISPLAY ICONS KEY

Indicates the receipt of the radio signal
On = during radio communication
O = no radio communication
Fixed on = serial input disabled
It indicates fumes motor operation.
O = fumes motor disabled
On = fumes motor active
Flashing = breakdown
It indicates tangential fan operation (where applicable)
O = not working
On = working
1
Flashing = motor at minimum
It indicates pellet feed motor operation
O = pellet feed motor disabled
On = pellet feed motor active
Indicates the compensation function
O = the function is disabled
On = the function is active
Indicates the contact of the external additional thermostat
Contact closed:
Contact open:
Flashing with closed
contact:
Flashing with open
contact:
46
DISPLAY OF VARIOUS
TEXT MESSAGES
the contact of the external additional
thermostat is closed and the STBY
function is disabled
the contact of the external additional
thermostat is open and the STBY
function is disabled
the contact of the external additional
thermostat is closed and the STBY
function is active
the contact of the external additional
thermostat is open and the STBY
function is active
OFF
Indicates the status of the additional thermostat input (GND - I3)
It indicates ducted motor operation
O = Motor disabled
On = Motor active
Flashing = the motor is running at minimum and in modulation
mode (additional input open)
Indicates the activation of the F1 function (future set-up)
O = function disabled
On = function active
It indicates weekly programming functioning
Indicator on = weekly programming active
Indicator o = weekly programming disabled
Indicates the stove modulation
On = the stove is working at the set power
Flashing = the power at which the stove is working is di erent to
the power set, the stove is modulating (for various reasons)
Indicates the presence of an alarm.
On: indicates the presence of an alarm
O : indicates the absence of alarms
Indicates the room temperature status
O = the T° read by the probe is above the set temperature
On = the T° read by the probe is below the set temperature
Tank probe
O = probe ok
On = broken probe (short circuit or open)
Flashing = modulation due to tank
ENGLISH
TO ACCESS
THE MENU
6 4
5
TEMPERATURE
SETTING