Customizing The Operator Panel; Selecting Temperature Units - Tribest sousvant Manual De Uso

CUSTOMIZING THE OPERATOR PANEL

The Sousvant operator panel can be customized to:
• Display temperature in either degrees Fahrenheit or degrees Celsius
• Set the display backlighting to a desired level
Note that customizations can be applied only when the unit is in the OFF/SET state.

Selecting Temperature Units

To change the temperature units selection:
a) Be sure that the OFF indicator is lit on the display.
b) Press the STOP and DOWN ARROW (▼) buttons simultaneously. The display will show SEL,
and the current units symbol (C or F) will blink.
c) Use the UP ARROW or DOWN ARROW buttons to select the desired units.
d) When no further adjustment has been made after approximately 10 seconds, the display will
revert back to the OFF/SET state.
Selecting Backlight Level
The display backlighting can be adjusted to a level that you feel is the most appropriate for the
ambient lighting of your home kitchen. To adjust the backlight level:
a) Be sure that the OFF indicator is lit on the display.
b) Press the STOP and UP ARROW (▲) buttons simultaneously. The display will show the letters
AdJ, and the current backlight intensity level (bL), from 1 to 25.
c) Use the UP ARROW and DOWN ARROW buttons to adjust the backlight level from 1 to 25.
d) When no further adjustment has been made for approximately 10 seconds, the display will
revert back to the OFF/SET state.
EN
13