Ugolini MINIGEL PLUS 1 Manual De Servicio página 39

fastening screw and pull the water collection tray out.
10. 4 DISASSEMBLING THE GEARED MOTOR
1 Remove the rear cover after loosening its fastening screws.
2 Loosen the fastening nuts on the geared motor and remove the latter from its seat.
10. 5 DISASSEMBLING THE DEFROSTING FAN AND THE LID PRESENCE SENSORS
1 Remove the air conveyor by pressing on either side. Pull the defrosting fan out of its seat in the conveyor. The lid presence
detectors are situated at the rear of the conveyor and can be removed from their seat with the help of a small screwdriver.
39