NON-DUCTED
RECIRCULATION FILTERS
INSTALLATION (NON-
DUCTED HOODS ONLY)
Non-ducted recirculation fi lters are included
with kit ANKCC3463. Replacement non-
ducted recirculation fi lters can be purchased
separately (AFCCC3463).
Kit and non-ducted recirculation filter are
optional for CC34IQ63SB only.
Position the non-ducted recirculation fi lter
over the grease fi lter and secure it by means
(4) wire retainers. Refer Figure 25.
INSTALL THE FILTERS
1. To install the grease fi lters, align rear fi lter tabs
with slots in the hood. Push latch tab in, push
fi lter into position and release. Make sure fi lter
is securely engaged after installation. Fig. 26.
2. To remove the fi lters for cleaning, push latch
tab in to disengage fi lter from hood. Tilt the
fi lter downward and remove.
NOTE: Remove protective fi lm from fi lters and
steel surfaces before using cooking under
range hood.
- 17 -
FIG. 25
FIG. 26