Cleaning And Maintenance - cecotec CONGA 990 Serie Manual De Instrucciones

ENGLISH
activate the robot from the control panel or from the remote control.
1) Set the current time and day
Press the button and the remote control will show the icon will blink.
First, select the day of the week using the direction arrows and select today's day.
To change from the day of the week to time, use the direction arrow . Press to select
the desired time. Repeat this action with the minutes: press and then to select the
minutes.
Once the day of the week and the time is set, press or to safe.
Note: the day of the week will not appear on the display. To make sure it has been saved, press
again and ensure it is the correct day.
2) Set the timer
The day of the week and the time must be set correctly in order for the schedule to operate
properly. Check the before section (Set the current time and day).
Press the button and the week day and icon will start flashing on the display.
Use arrows to select the day of the week you desire to schedule.
To change from the day of the week to time, use the direction arrow . Press X to select the
desired time. Repeat this action with the minutes: press and then to select the minutes.
To safe this setting, aim the remote control at the robot and press . The robot will emit a beep
indicating the schedule has been saved correctly. In case it does not beep, the day's schedule
has not been saved.
It must be scheduled each day; therefore, this process has to be repeated each day you desire
to schedule.
Once the day and times have been set, press to exit. The display will show the scheduled
days and the robot will automatically operate at the indicated time.
Note: the robot's switch must be set at "I" and the robot charged in order for the robot to
operate automatically at the correct time.
3) Schedule cancelling
Press on the remote control for 3 seconds. The icon on the display will turn off and the robot
will beep twice, indicating the schedule has been cancelled. Repeat this process with every
scheduled day of the week.

5. CLEANING AND MAINTENANCE

*Before starting to work on the cleaning or maintenance of the robot and its accessories,
please turn off the product and unplug the charging base.
27