OXYHYDROGEN TECHNOLOGIES OXYHTECH MAXI PLUS Manual De Uso página 3

ELECTRICAL POWER AND FREQUENCIES
All machines are factory adjusted to obtain the gas production offered in each model,
and power and amperes can vary due to various conditions, which are water
temperatures, resulting spaces in microns of the electrolytic cell, concentration in
grams of the electrolyte , voltage and frequency of the network and finally the
internal electronic components of our technology that allow the pertinent variations.
Each one of the machines are precisely adjusted at the factory, using a mass meter,
calibrated and certified to measure various gases, among which we are interested in
this case, which are hydrogen and oxygen.
THE FIRST START-UP MUST BE PERFORMED BY PERSONNEL AUTHORIZED BY THE COMPANY
Attention-
For security reasons, any break or sign of tampering with the
security seal will automatically lead to the cancellation of the
guarantee.
VERY IMPORTANT:
THE RANGE OF AMBIENT TEMPERATURE SUITABLE FOR THE USE OF THE
MACHINE IS BETWEEN 1º AND 55º.
DO NOT EXPOSE THE MACHINE TO TEMPERATURES WHERE THERE IS A RISK
OF FREEZING OF LIQUIDS (-1). SERIOUS DAMAGE TO THE MACHINE COULD
OCCUR.
THE MACHINES INCORPORATE AN AUTOMATED REFRIGERATION SYSTEM.
THE MACHINE IN CASE OF INTENSIVE USE IN EXTREME WORKING
CONDITIONS WILL NEVER EXCEED 70Cº.
ALWAYS USE THE PROPER FUNNEL. IF CONTAINED CONTAINERS OR FUNNELS
ARE USED (REMAINS OF OIL, FAT, DETERGENTS ETC)
IT WILL BE ENOUGH REASON TO CONTAMINATE THE INTERIOR OF THE
MACHINE CREATING A LARGE AMOUNT OF FOAM THAT MAY GENERATE A
FAILURE. (NOT COVERED BY WARRANTY)
BE VERY CAREFUL NOT TO SPILL LIQUID ON THE ELECTRONIC PANELS.
IF THE WATER OVERFLOWS OR SPLASHES, IT COULD DAMAGE ELECTRONIC
PARTS OF THE MACHINE.
TIGHTLY CLOSE THE PLUG. (IF THE GAS WHICH IS VERY VOLATILE IS NOT
CORRECTLY CLOSED, IT WILL LEAK.)
For your safety it is forbidden to open the machine.