Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
6
Press (MENU) twice.
The setting is complete and the display
returns to normal play/reception mode.
Labelling a station/disc
When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 12).
1
While receiving a station or playing a
disc that you want to label, press
(MENU).
2
Press (GP/PRESET) +/– repeatedly until
"NAMEEDIT" appears, then press
(ENTER).
3
Press (GP/PRESET) +/– repeatedly until
the desired character appears.
The character changes as follows:
A y B y C ... y 0 y 1 y 2 ... y +
y – y
... y
To move the digital indication, press the
(SEEK) –/+.
Repeat this operation until the entire name is
entered.
4
Press (ENTER).
The labelling is complete and the display
returns to normal reception/play mode.
To display the name, press (DSPL) during
reception/playback.
Tips
• To correct or erase a character, overwrite or enter
"
."
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• "REP-TRACK" and all shuffle play are suspended
10
until the labelling is complete.
(blank space) y A
Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
(MENU).
2 Press (GP/PRESET) +/– repeatedly until
"NAME DEL" appears, then press (ENTER).
The stored name will flash.
3 Press (GP/PRESET) +/– repeatedly to select
the name you want to delete.
4 Press and hold (ENTER).
The name is deleted. Repeat steps 3 and 4 if
you want to delete other names.
5 Press (MENU) twice.
The unit returns to normal reception/play
mode.
Adjusting menu items — MENU
You can adjust various menu settings by using
the 4 arrow buttons.
M
<
SEEK
m
1
Press (MENU).
2
Press (GP/PRESET) +/– (M/m)
repeatedly until the desired item
appears.
3
Press (SEEK) –/+ (</,) to select the
desired setting (example: "ON" or
"OFF").
4
Press (ENTER).
The setting is complete and the display
returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Tip
You can easily switch among categories by pressing
and holding (GP/PRESET) +/–.
The following items can be set (follow the page
reference for details):
"
" indicates the default settings.
z
SET
(Setup)
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "ON" (
) or "OFF."
z
,
SEEK