Using Optional Equipment; Cd/Md Changer; Continue To Next - Sony CDX-F5710X Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "NORM" (
): to use the rotary commander in
z
the factory-set position.
– "REV": when you mount the rotary
commander on the right side of the steering
column.
AUX-A*
1
(AUX Audio)
To turn the AUX source display "ON" (
"OFF" (page 13).
DSPL
(Display)
CLOCK (Clock Information)
To display the clock and the display mode at the
same time.
– "ON": to display at the same time.
– "OFF" (
): to not display at the same time.
z
DIM (Dimmer)
To change the brightness of the display.
– "AT" (
): to dim the display automatically
z
when you turn lights on.
– "ON": to dim the display.
– "OFF": to deactivate the dimmer.
DEMO*
1
(Demonstration)
To set "ON" (
) or "OFF" (page 4).
z
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 5 steps.
M.DSPL*
2
(Motion Display)
To select the Motion Display mode.
– "SA" (
): to show moving patterns and
z
spectrum analyzer.
– "ON": to show moving patterns.
– "OFF": to deactivate the Motion Display.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– "ON": to scroll.
– "OFF" (
): to not scroll.
z
P/M
(Play Mode)
LOCAL (Local seek mode)
– "ON": to only tune into stations with stronger
signals.
– "OFF" (
): to tune normal reception.
z
MONO (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "ON": to hear stereo broadcasts in monaural.
– "OFF" (
): to hear stereo broadcast in stereo.
z
IF AUTO/WIDE
– "AUTO" (
): to narrow automatically the
z
reception frequency to eliminate noise.
3
– "WIDE"*
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
SND
(Sound)
EQ7 TUNE (page 9)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "off" (
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
(
), "125Hz" or "78Hz."
z
LOUD (Loudness)
) or
z
To enhance bass and treble at lower volume.
– "ON": to reinforce bass and treble.
– "OFF" (
AUX LVL (AUX Level)
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources.
EDIT
NAMEEDIT (Name Edit) (page 10)
NAME DEL (Name Delete) (page 10)
BTM (page 8)
*1 When the unit is turned off.
*2 When the unit is turned on.
*3 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number
Playback starts.
), "78Hz" or "125Hz."
z
): to not reinforce bass and treble.
z
Disc number
continue to next page t
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido