Rotary Commander Rm-X4S - Sony CDX-F5710X Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Skipping groups and discs
1 During playback, press (GP/PRESET) +/–.
Press (GP/PRESET)
To skip
group
and release (hold for a
moment).
group
within 2 seconds of first
continuously
releasing.
discs
repeatedly.
discs
then, press again within 2
continuously
seconds and hold.
Repeat and shuffle play
1 During playback, press (1) (REP) or (2)
(SHUF) repeatedly until the desired setting
appears.
Select
To play
REP-DISC*
1
disc repeatedly.
SHUF-
tracks in the changer in random
CHGR*
1
order.
SHUF-ALL*
2
tracks in all units in random
order.
*1 When one or more CD/MD changers are
connected.
*2 When one or more CD changers, or two or more
MD changers are connected.
To return to normal play mode, select "REP-
OFF" or "SHUF-OFF."
Tip
"SHUF-ALL" will not shuffle tracks between CD units
and MD changers.
Locating a disc by name — list-up
You can select a disc from the list when
connecting a CD changer with the CUSTOM
FILE function or an MD changer.
If you assign a name to a disc, the name appears
on the list. For details on labelling a disc, see
page 10.
1 During playback, press (LIST).
The disc number or disc name appears.
2 Press (GP/PRESET) +/– repeatedly until the
desired disc appears.
3 Press (ENTER) to play the disc.
12

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SO U N D
M O D E
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SOUND
PRESET/
DISC
SOURCE
VOL
SEEK/AMS
The following controls on the rotary commander
require a different operation from the unit.
• PRESET/DISC control
To control radio/CD, the same as
(GP/PRESET) +/– on the unit (push in and
rotate).
• VOL (volume) control
The same as the volume control dial on the unit
(rotate).
• SEEK/AMS control
To control radio/CD, the same as (SEEK) –/+
on the unit (rotate, or rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
D S P L
M O D E
S O U N D
ATT
MODE
DSPL
OFF
To decrease

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido