Sony CDX-F5710X Manual De Instrucciones página 7

G Display window
H OPEN button 5
To open the front panel.
I COLOR button
To select one of 7 colour settings for the
LCD.
J EQ7 (equalizer) button
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
K MENU button
To enter menu.
L SEEK –/+, < (.)/, (>) buttons
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
M ENTER button
To complete a setting.
N MODE button 8, 11
To select the radio band (FM/AM)/select the
4
unit* .
O DSPL (display) button 8, 10
To change display items.
P Frequency select switch (located on
the bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
Q Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD* 1 :
(1): REP 8
(2): SHUF 8
(5): BBE MP*
5 2
To activate the BBE MP function, set
"BBEMP-ON" during playback on this unit.
To cancel, set "BBEMP-OFF."
R OFF button
To power off/stop the source.
S RESET button 4
T Z (eject) button 5
To eject the disc.
U Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
ws VOL (volume) +/– button
To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf SOUND button 9
To select sound items.
wg SCRL button 8
To scroll the display item.
*1 When an MD changer is connected.
*2 When an optional Sony portable device is
connected.
*3 When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 12.
*4 When a CD/MD changer is connected.
*5 The unit only.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 14.
7