Installing Cordless Phone And Handset - Steren TEL-2490 Manual De Instrucciones

3.2 Installing cordless phone and handset

1. Connect the power adapter into DC 6V input jack in the base and handset.
2. Connect the power adapter into an outlet.
3. Connect the phone line cable to LINE input jack, located in the bottom of the phone's
base.
4. After you install the phone system, and the batteries of the handset are totally
charged, check that you have dial tone.
- IF YOU ARE SUBSCRIBER TO A DSL
SERVICE (OPTIONAL)
If you receive high speed Internet through
your telephone line (commonly referred to as
DSL), and you are experiencing interference
during conversations, and/or your caller ID
features are not functioning properly, and you
subscribe to DSL service from your telephone
company, install a DSL filter (steren 300-997)
to the telephone line between the telephone
base and the telephone line jack.
14 14
3. INSTALLATION