Changing The Sound And Display Settings - Sony XR-C7500RX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Changing the sound and
display settings
The following items can be set:
SET
•Clock (page 9).
•CT (Clock Time) (page 18).
•Beep – to turn the beep sound on or off.
•RM (Rotary Commander) – to change the
operative direction of the rotary commander.
— Select "norm" to use the rotary
commander as the factory-set position.
— Select "rev" when you mount the rotary
commander on the right side of the
steering column.
•Multi language (language selection) – to
change the display language to English,
Spanish, Portuguese, or Swedish.
DIS
•D.Info (Dual Information)*
clock and the play mode simultaneously (on),
or to display the information alternately (off).
•SA (Spectrum Analyzer) – to change the
display pattern of the equalizer display.
2
•Amber/Green*
– to change the illumination
colour to amber or green.
•Dimmer – to change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the interior lights on.
— Select "on" to dim the display.
— Select "off" to deactivate Dimmer.
•Contrast – to adjust the contrast if the
indications in the display are not
recognizable because of the init's installed
position.
•M.Dspl (Motion Display) – to turn the
motion display on or off.
•A.Scrl (Auto Scroll)*
SND
•EQ Tune (Equalizer tuning) – to adjust the
frequency and volume level of equalizer
curve.
30
1
– to display the
1
(page 31).
1
Press (MENU).
2
Press either side of (PRST/DISC)
repeatedly until the desired item
appears.
Each time you press (–) side of
(PRST/DISC), the item changes as follows:
Example:
Clock t CT t Beep t RM t Multi language
1
t D.Info*
t SA t Amber/Green*
Dimmer t Contrast t M.Dspl t A.Scrl*
EQ Tune
1
When the radio is off, or when no tape, CD,
*
or MD is playing, this item will not appear.
2
XR-C7500R only
*
Note
The displayed item will differ depending on the
source.
Tip
You can easily switch among categories ("SET,"
"DIS" and "SND") by pressing and holding either
side of (PRST/DISC) for two seconds.
3
Press (+) side of (SEEK/AMS) to select the
desired setting (Example: "on" or "off").
4
Press (ENTER).
After the mode setting is complete, the
display returns to normal playback mode.
2
t
1
t

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xr-c7500r

Tabla de contenido