Selecting Specific Tracks For Playback - Sony XR-C7500RX Manual De Instrucciones

Selecting specific tracks
for playback
(For a CD unit with the custom file function)
If you label the disc, you can set the unit to
skip or play the tracks of your choice.
1
Start playing the disc you want to label.
2
Press (MENU), then press either side of
(PRST/DISC) repeatedly until "Bank sel"
appears.
3
Press (ENTER).
Bank edit mode
4
Label the tracks.
1 Press either side of (SEEK/AMS)
repeatedly to select the track you
want to label.
2 Press (ENTER) repeatedly to select
"Play" or "Skip."
5
Repeat step 4 to set "Play" or "Skip" for
all the tracks.
6
Press (MENU) twice.
The unit returns to normal CD playback
mode.
Notes
• "NO Name" flashes for five seconds when an
unlabelled disc is selected in step 3.
• You can set "Play" and "Skip" for up to 24
tracks.
• You cannot set "Skip" for all the tracks on a CD.
— Bank
Playing specific tracks only
You can select:
• "Bank on" – to playback the tracks with the
"Play" setting.
• "Bank inv" (Inverse) – to playback the tracks
with the "Skip" setting.
1
During playback, press (MENU), then
press either side of (PRST/DISC)
repeatedly until "Bank" appears.
2
Press (+) side of (SEEK/AMS) repeatedly
until the desired setting appears.
B Bank on
Bank off b
3
Press (ENTER).
Playback starts from the track following the
current one.
To return to normal playback mode, select
"Bank off" in step 2 above.
B Bank inv
GB
35