Bresser NV 3x25 Manual De Instrucciones página 16

Increase.brightness.of.the.infrared.illuminator: When the infrared il-
luminator is switched off (red status LED off), a single press (more than 1
second, and less than 3 seconds) of the button turns it on. The red status
LED then lights up.
When the infrared illuminator is on (red status LED lit), you can increase the
brightness by approx. 20% with each press (more than 1 second, and less
than 3 seconds) of the button, until the brightness is 100%. After reaching
100%, long presses will have no effect.
You can quickly increase the brightness of the infrared illuminator with a sin-
gle long press of more than 3 seconds, until it has reached 100%. The red
indicator will be lit during this operation. After reaching 100%, long presses
will have no effect.
Increase.brightness.of.the.image.display: When the device is turned on,
you can increase the brightness of the image display by 10% with each short
press (less than 1 second) of the button, until the display reaches 100%.
After reaching 100%, short presses will have no effect.
Multifunction.button.(3 functions):
• Infrared illuminator Off
• Decrease brightness of the infrared illuminator
• Decrease brightness of the image display
Decrease.brightness.of.the.infrared.illuminator: When the infrared illumi-
nator is on (red status LED lit), a single press (more than 1 second, and less
than 3 seconds) of the button decreases the brightness of the infrared illumi-
nator by approx. 20%. This can be repeated until the brightness reaches 0%
and the infrared illuminator switches off. The red status LED then switches off
as well. After turning off, long presses will have no effect.
When the infrared illuminator is on (red status LED lit), a single long press of
more than 3 seconds quickly extinguishes the infrared illuminator, and the red
status LED switches off. After turning off, long presses will have no effect.
16