Operation Instructions - Harbor Breeze 0080443 Manual De Instrucciones

OPERATING INSTRUCTIONS
1 . Use the fan reverse switch, located on the top of the
motor assembly (I), to optimize your fan for seasonal
performance .
A ceiling fan will allow you to raise your thermostat
setting in the summer and lower your thermostat
setting in the winter without feeling a difference in
your comfort .

Note: Wait for the fan to stop before moving the
reverse switch .
1A . In warmer weather, push the reverse switch to the left
to display a Sun icon, which will result in downward
airflow creating a wind chill effect.
1B . In cooler weather, push the reverse switch to the
right to display a Snowflake icon, which will result in
upward airflow that can help move stagnant, hot air
off the ceiling area .
Impootaat:
The reverse switch must be set either
completely to the right or to the left in or-
der for the fan to function correctly . If the
reverse switch is set in the middle posi-
tion, the fan will not operate . See Fig . 1C .

Note: The receiver is already wired and built into the housing of the fan at the factory . You do not
need to assemble the receiver .
2 . Installing the Battery:
Remove the battery cover from the remote control
(P) and install the 12 V battery (Q) . Ensure the plug
is fully attached to the battery (Q) and replace the
battery cover .
1
I
Fig. 1A
2
19
Lowes.com/harborbreeze
Fig. 1B
Fig. 1C
+
-
P Q