Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION INSTRUCTIONS FOR REMOTE CONTROL AND FAN
1.
Operation buttons on the panel of the remote
control transmitter (Q) (Fig. 1):
button
for fan HIGH speed
button
for fan MEDIUM speed
button
for fan LOW speed
button
for turning fan OFF
button
for light BRIGHTNESS and
to turn light OFF
The light function is controlled by pressing the
button. Hold
decrease light. Tap button quickly to turn light off or
on. If you press the button in excess of 0.7 seconds
it becomes a dimmer. The light varies cyclically in
0.8 seconds. The light button has an auto resume
function that keeps the light at the same brightness
as the last time it was turned off.
IMPORTANT: Turn fan off at wall switch and let
blades (G) come to a complete stop before
manually activating the reverse switch.
2. Use the fan reverse switch, located on the motor
housing (E), to optimize your fan for seasonal
performance. Refer to section titled "Changing
Reverse Switch Setting" for instructions on how to
move reverse switch. (Fig. 2) A ceiling fan will
allow you to raise your thermostat setting in
summer and lower your thermostat setting in
winter without feeling a difference in your comfort.
NOTE: Wait for fan to stop before moving the
reverse switch.
button down to increase or
1
2
Reverse
Switch
E
18
Q
V
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
