Standard Or Angle Mounting Instructions - Harbor Breeze 0080443 Manual De Instrucciones

STANDARD OR ANGLE MOUNTING INSTRUCTIONS

1 . Remove the downrod pin (DD) and downrod clip
(EE) from the downrod (E) . Then partially loosen the
motor housing set screws (FF) in the yoke at the top
of the motor assembly (I) .
Haodwaoe Used
DD
Downrod Pin
EE
Downrod Clip
Motor Housing
FF
Set Screw
2 . Insert the downrod (E) through the canopy (B),
canopy cover (C), and yoke cover (D) . Thread
the wires from the motor housing assembly (I) up
through the downrod (E) and hanger ball rubber
coupling (S) . This will prevent water from running
through the down rod .
1
EE
x 1
x 1
x 2
2
I
9
Lowes.com/harborbreeze
E
DD
FF
E
I
S
E
C
D
B