EN - Safety
This machine is electrically tested and satisfies European Safety
Standards.It is constructed according to the available scientific
information and state-of-the art technology.
It is fitted with a safety device in the form of a circuit breaker. Dan-
gers can occur in spite of this, in particular in the case of improper
use or non-compliance with the specifications and instructions in
these operating instructions.
WARNING
Electric voltage / electric current
Contact with voltage or current bearing parts carries the
risk of electric shock, which can result in serious injury or
even death.
Never touch damaged cables. Replace faulty cables immediately.
■
Always switch off and disconnect the power supply before carrying
■
out any work on the machine.
This machine is not intended for use by persons and/or children
■
under 12 with reduced physical, sensory or mental capabilities or
lack of experience and knowledge unless they have been given initial
supervision or instruction concerning the use of the machine by a
person responsible for their safety and understand the dangers con-
nected to it. Children are not allowed to play with the machine. The
cleaning and user maintenance may only be performed by trained
and instructed personnel.
Conversions and modifications to the machine are not permitted.
■
Safety instructions for the use and the maintenance of the machine
■
are listed in the corresponding chapters and must be strictly ob-
served!
Never use a defective machine.
■
8
Responsibility of the operator:
The machine is designed for professional use. The operator of the
machine is therefore subject to the statutory obligations for occupational
health and safety.
Besides the safety notices in these operating instructions, additionally, the
national, and generally valid operation safety and accident prevention are
binding.
In this the following applies in particular:
The machine is only used by personnel instructed in its handling and
■
authorized to use it.
The operator must ensure that the recognized occupational safety regu-
■
lations and all other legal or company internal provisions are observed.
■
The operator must ensure that all users are acquainted with the safety
regulations and trained in the use of the specific machine.
The operator must ensure that responsibilities for the operation, mainte-
■
nance and repair of the machine are clearly assigned and observed.
■
The operator must ensure that all users have read and understood the
operating instructions before using the machine.
Furthermore the operator must ensure that the machine is in perfect
technical condition. Therefore following applies:
■
It is the responsibility of the operator to ensure that the maintenance
intervals described in these operating instructions are observed.
The operator must ensure that all safety devices are controlled on func-
■
tion and completeness on a regular bases.
■
Faults and damage must be immediately notified to the Wetrok Service
Agent.
Responsibility of the user:
The machine may only be used by personnel who have been instructed
■
in its handling and authorized to use it.