Deleting Network Settings; Information On Data Protection - Gaggenau RF411704 Instrucciones De Uso

Deleting network settings

If there is a problem when trying to establish a
connection, or if you would like to register the appliance
in a different home network (WLAN), the Home
Connect settings can be reset.
1.
Open the Home network menu on your refrigerator.
~ "Setting up Home Connect" on page 21
Press C button to move to the menu item Delete
2.
network settings.
3. Press % button to open the menu item.
4.
Confirm the message to delete the network settings.
To then reconnect the appliance to the home network,
perform initial setup again.
~ Page 21

Information on data protection

The first time your Home Connect appliance is registered
on the WLAN network connected to the Internet, your
appliance will transmit the following types of data to the
Home Connect server (initial registration):
Unique appliance identification (consisting of
▯
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the WiFi communication module
▯
(to ensure a secure data connection).
The current software and hardware version of your
▯
domestic appliance.
Status of any previous resetting to factory settings.
▯
This initial registration prepares the Home
Connect functions for use and is only required when you
want to use these Home Connect functions for the first
time.
Note: Please note that the Home Connect functions can
only be utilized with the Home Connect app. Information
on data protection can be called up in the Home
Connect app.
en-us
Home Connect
23