Replacing Foglamp Bulbs - Ford Explorer Sport Trac 2005 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Lights
4. Remove the bulb socket.
5. Carefully pull bulb straight out of
socket and push in the new bulb.
Reverse steps to reinstall the bulb(s).
Replacing tail lamp/turn/backup lamp bulbs
1. Make sure the headlamp switch is
in the OFF position and lower the
tailgate to expose the lamp
assembly.
2. Remove the three rubber plugs,
screws and the lamp assembly from
vehicle.
3. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
4. Carefully pull the bulb straight
out of the socket.
Reverse steps to reinstall the bulb(s).

Replacing foglamp bulbs

1. Make sure the headlamp switch is
in the OFF position and then
remove the splash shield, by
removing the two screws on the
front of the fenderwell.
2. Remove the bulb socket from the foglamp by turning counterclockwise.
3. Disconnect the electrical connector from the foglamp bulb.
Reverse steps to reinstall the bulb(s).
55
2005 P207 Explorer Sport Trac (p27)
Owners Guide (post-2002-fmt)
USA_English (fus)

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido