Replacing License Plate Lamp Bulbs - Ford Explorer Sport Trac 2005 Manual De Uso

Lights
Replacing high-mount brakelamp and cargo lamp bulbs
To remove the brakelamp assembly:
1. Remove the two screws and lamp
assembly from vehicle.
2. Remove the bulb socket from
lamp assembly by turning it
counterclockwise and pull the bulb
straight out.
Reverse steps to reinstall the bulb(s).

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position, then remove
the license plate assembly.
2. Remove the bulb socket from the
lamp assembly by turning it
counterclockwise and pulling the
bulb straight out.
Reverse steps to reinstall the bulb(s).
56
2005 P207 Explorer Sport Trac (p27)
Owners Guide (post-2002-fmt)
USA_English (fus)