Ford Explorer Sport Trac 2005 Manual De Uso página 526

Maintenance and Specifications
Fluid Ford Part
Name
4
Engine coolant Motorcraft
Premium Gold
Engine Coolant
(yellow-colored)
Front axle Motorcraft SAE
lubricant 80W-90
Premium Rear
Axle Lubricant
Rear axle Motorcraft SAE
5
lubricant 75W-140
Synthetic Rear
Axle Lubricant
Windshield Motorcraft
washer fluid Premium
Windshield
Washer
Concentrate
1
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
MIX MERCON and MERCON V. Refer to the scheduled maintenance
information to determine the correct service interval.
2
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
3
Fill to bottom of filler plug hole.
4
Add the coolant type originally equipped in your vehicle.
5
Fill to1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of filler plug
hole.
6
Rear axles containing synthetic lubricant are lubricated for life. These
lubricants are not to be checked or changed unless a leak is suspected or
service is required. The axle lubricant should be changed any time the
axle has been submerged in water.
Add 4 oz (118 ml.) of Additive Friction Modifier XL-7 or equivalent for
complete refill of Traction-Lok axles.
242
2005 P207 Explorer Sport Trac (p27)
Owners Guide (post-2002-fmt)
USA_English (fus)
Application
Capacity
4.0L SOHC V6 14.0 quarts
engine (13.2L)
4x4 vehicles 1.8 quarts
(1.7L)
8.8 inch 5.5-5.8 pints
conventional and (2.9-3.1L)
Traction-Lok
6
axles
All 2.7 quarts
(2.6L)