Calibrating The Meter For Glucose Testing - Abbott FreeStyle Precision H Manual Del Usuario

Calibrating the Meter for Glucose Testing

Remove the glucose calibrator (white) from the new box of test strips.
Peel the clear cover away from the corner with three bumps to open the calibrator
package.
Prepare the Meter
Hold the calibrator with the LOT number facing you. Insert the calibrator into the
meter until it stops. This turns the meter on.
This display always appears when the meter is turned on.
Do not use the meter if the display check screen does not exactly match the
example. Contact Customer Service.
See "Preparing the Meter for Glucose Testing" section for more information.
Time and date (if set) appear next.
The LOT number of the box of test strips you are using appears on the display.
(Example shown)
The beeper (if sound is on) beeps.
IMPORTANT: Use only the calibrator that is packaged in the box of
test strips you are using.
6