Performing A Control Solution Test - Abbott FreeStyle Precision H Manual Del Usuario

Performing a Control Solution Test

27
Open the foil test strip packet at the notch and tear down to remove the
test strip.
Insert the Test Strip
With the contact bars (3 black lines) facing up, insert the test strip into the meter
until it stops. This turns on the meter.
Note: The meter turns off after 3 minutes of inactivity. Remove and reinsert the
unused test strip to restart the meter.
This display always appears when the meter is turned on.
Do not use the meter if the display check screen does not exactly match the
example. Contact Customer Service.
See "Preparing the Meter for Glucose Testing" section for more information.