Mutsy Spider Manual De Instrucciones página 21

is facing up. The front wheel block will
only click closed automatically when
the front wheel block is completely
covering the end of the tube.
Removing the rear wheels (c2)
· You can remove the rear wheels by
pressing the plastic lip at the end of the
wheel axle and then pulling the wheel
axle out of the plastic notch.
Removing the front wheel block (d2)
· The front wheel block can be removed
by clicking the plastic lip on the under-
side of the front wheel block out. This
then unlocks the front wheel block,
allowing it to be removed from the ver-
tical axle.
The sun canopy (e)
· Use the click system to fasten the sun
canopy to the Spider frame. Push
the 2 plastic components (L+R) on
the cap in the appropriate notches
(canopy fastening points) until you
hear a click.
· Remember to stretch the sun canopy
with the aid of the plastic stretchers on
both sides of the canopy.
· To remove the canopy, press (L+R)
the appropriate pawl and then pull the
canopy out of the notches.
Securing your child
! Always use the safety belt when
you child can sit independently.
· Place your child in the stroller seat,
ensuring that one of your child's legs in
on either side of the leg separator
· Ensure that both the seat and foot rest
are adjusted correctly for the size of
your child.
· The Spider stroller is fitted with a 5-
point safety belt. Operate the safety
belt by clicking the plastic components
of the safety belt together.
· The belt can be adjusted by sliding the
adjustment mechanism over the belts
to the desired position.
Adjusting the back support (f)
· If you want to move the back rest back
wards, press both sides of the adjust-
ment button at the rear of the stroller
seat and simultaneously move the
adjustment button backwards until the
desired position has been reached.
· If you wish to move the back rest for
wards, press both sides of the adjust-
ment button at the rear of the stroller
seat and simultaneously move the
adjustment button forward until you
have reached the desired position.
Adjusting the foot rest (g)
· To adjust the foot rest, move both plas-
tic handles (L+R) under the foot rest
towards you while simultaneously
moving the foot rest into the desired
position.
Adjusting the height of the push bar (h)
· The push bar can be adjusted to any
height. Find out what height is comfort-
able for you.
· Adjust the push bar with the clamps at
the rear, as described above in "folding
out the Spider frame".
Folding the frame (k)
· Apply the brakes.
· Start by folding the push bar. First,
release the clamps at the back of the
push bar. You can now push the push
bar down until it can move no fur-
ther. Remember to lock the push bar
clamps.
· There is a handle located underneath
the seat, on the left. Pull this out when
you wish to fold the seat up. A handle
with which you can unlock the Spider
is located under the seat in the cen-
tral fastening section. First pull this
away from you – this unlocks the upper
frame. Now push the handle up, which
then folds up the lower frame.
! You do not have to remove the sun
canopy, but the product can be folded
more compactly if you first remove the
sun canopy.
· You can reattach the frame lock to the
basket if you wish.
The steering system (Spider)
The swivel setting (i)
· Push the swivel blocking on the front
wheel block up. The front wheel block
can now swivel.
English
15