Specifications - Sony MHC-GNX660 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the tape tab from side A or B as
illustrated.
Break off the
tape tab
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a tape in the tape deck
Take up any slack in the tape deck. Otherwise, the tape
may get entangled in the parts of the tape deck and
become damaged.
When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operations such as playback, stop and fast-winding etc.
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clean the tape heads before you start an
important recording or after playing an old tape. Use a
separately sold dry-type or wet-type cleaning tape. For
details, refer to the instructions of the cleaning tape.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetizing tape. For
details, refer to the instructions of the demagnetizing
tape.

Specifications

Amplifier section
MHC-GNX660 (HCD-GNX660)/
MHC-GNX600 (HCD-GNX600)
The following are measured at
Mexican model:
Brazil model:
Other models:
Front speakers
DIN power output (rated) 130 + 130 watts
Continuous RMS power output (reference)
Sub woofer
Continuous RMS power output (reference)
TV (AUDIO) IN (phono jack)
MIC (phone jack)
Outputs
VIDEO OUT (phono jack)
(MHC-GNX660 only)
PHONES (stereo mini jack)
FRONT SPEAKER/SUB WOOFER OUT
127 V AC, 60 Hz
127 V or 220 V AC,
50/60 Hz
120 V, 220 V, 240 V AC,
50/60 Hz
(6 ohms at 1 kHz, DIN)
160 + 160 watts
(6 ohms at 1 kHz,
10% THD)
200 watts
(4 ohms at 100 Hz,
10% THD)
voltage 250 mV,
impedance 47 kiloohms
sensitivity 1 mV,
impedance 10 kiloohms
max. output level
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
accepts headphones of
8 ohms or more
Use only the supplied
speaker
continued
33
GB

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mhc-gnx600

Tabla de contenido