Teac AD-850 Manual Del Usuario página 32

3
Press the RECORD TAPE button to start recording
standby.
The red indicator above the RECORD TAPE button and the
icons on the display blink .
< To stop recording, press the TAPE Stop (H) button .
4
Adjust the recording level.
Before recording, adjust the recording level . Failure to do so
could cause the recorded sound to be distorted or noisy .
1. Play the source (external source) to be recorded .
2. Adjust the REC LEVEL knob so that the peak level meter never
exceeds 0 continuously .
< Different sources to be recorded have different volumes . In
order to record at the optimal volume for each source, it is
necessary to adjust the recording level for each source .
32
Recording on a cassette tape (continued)
5
Prepare a recording source.
Recording from a CD
To record all the tracks/files on a CD, stop the disc first . To record
only some of the tracks/files on a CD, pause at the beginning of
the part that you want to record .
You can also record tracks in programmed order . For information
about how to set the program, see page 21 .
Recording from a USB flash drive
To record the entire contents of the USB flash drive, stop the
unit . To record from the middle of the USB flash drive, pause at
the point from where you want to start recording .
You can also record tracks in programmed order . For information
about how to set the program, see page 21 .
< See page 40 for information about the playback order of
MP3 files .
Recording from an external source
Prepare to start playback of the source device .
Example: Set the source selection of an amplifier .
Set the playback media in a connected player .
To record from a tuner, tune in a station .