Clearing The Program; Exiting Program Mode - Teac AD-850 Manual Del Usuario

Checking the program order
When playback is stopped, press the PROGRAM button repeatedly .
The numbers of the programmed tracks/files and their program
numbers will be shown in order .
Deleting tracks/files from the program
When playback is stopped, press the PROGRAM button repeatedly
until the program number of the track to be deleted appears
on the display .
Press the CLEAR button .
The track/file is deleted from the program .
Press
repeatedly
Press
repeatedly
Program number
to be deleted

Clearing the program

When playback is stopped, press the PROGRAM button, followed
by the CLEAR button or CD/USB Stop (H) button more than 1
second .
The PROGRAM indicator disappears and all the contents of the
program are cleared .
< If the PROGRAM indicator is not shown, press the PROGRAM button
to activate program mode before pressing the CLEAR button .
< If one of the following buttons is pressed, the contents of the
program are also cleared .
In CD mode
POWER button, CD OPEN/CLOSE (L) button, SOURCE
button
In USB mode
POWER button, SOURCE button

Exiting program mode

When playback is stopped, press and hold the PROGRAM button
more than 1 second or press the CD/USB Stop (H) button . The
PROGRAM indicator will disappear .
< This does not clear the contents of the program . Press the PROGRAM
button again and then press the CD/USB Play (t) button if you want
to restart program playback .
Press
at least
1 second
Press
at least
1 second
23