Before Use - Teac AD-850 Manual Del Usuario

What's in the box
Confirm that the standard accessories are included .
Remote control (RC-1329) × 1
Batteries (AAA) for remote control × 2
RCA audio cables × 2
Owner's manual (this document) × 1
o For information about the warranty, users living in the USA
and Canada should see pages 124–125 and the back cover
(warranty document) . Users living in Europe and other regions
should see page 126 .
o Keep this manual in a safe place for future reference .
Quick start guide for recording × 1
Precautions for use
< Do not move the unit during CD playback .
During CD playback, the disc rotates at high speed . Do not lift or
move the unit during playback . Doing so might damage the disc
or the unit .
< The voltage supplied to the unit should match the voltage that
is printed on the rear panel . If you are in any doubt regarding this
matter, consult an electrician .
< Do not open the cabinet as this might result in damage to the
circuitry or electrical shock . If a foreign object should get into the
unit, contact your dealer or service company .
< When removing the power plug from the wall outlet, always pull
directly on the plug, never yank on the cord .
< Always remove the disc before relocating or moving this unit .
Moving the unit with a disc inside it could cause malfunction .
6

Before use

Placement of the unit
< Choose the location where you install the unit carefully . Avoid
placing it in direct sunlight or close to a source of heat . You should
also avoid locations that are subject to vibrations or exposed to
excessive dust, heat, cold or moisture .
< As the unit may become warm during operation, always leave
sufficient space around it for ventilation .
< Do not place the unit on an amplifier, a receiver or any other
device that generates heat .
Beware of condensation
When the unit is moved from a cold to a warm place, or used after a
sudden temperature change, there is a danger of condensation; vapor
in the air could condense on the internal mechanism, making correct
operation impossible . To prevent this, or if this occurs, leave the unit
turned on for one or two hours . Then the unit will stabilize at the tem-
perature of its surroundings .
Using the TEAC Global Site
You can download updates for this unit from the TEAC Global Site:
http://teac-global.com/
1) Open the TEAC Global Site .
2) In the TEAC Downloads section, click the desired language to
open the Downloads website page for that language .
NOTE
If the desired language does not appear, click Other Languages .
3) Click the "Search by Model Name" section to open the Downloads
page for that product . (Users in Europe should click the product
name in the "Products" section instead . )
4) Select and download the updates that are needed .
Product registration
Customers in the USA, please visit the following TEAC website to regis-
ter your TEAC product online .
http://audio.teac.com/support/registration/