Replacing The Halogen Lamp/Led - Dentsply Sirona Midwest Stylus Plus Instrucciones De Uso

6607290.book Seite 61 Donnerstag, 4. Januar 2018 11:55 11
®
Operating Instructions Midwest Stylus Plus / Midwest Tradition
A B
66 07 290 D3673.201.01.04.02
®
TC/Pro TCF
8.2.3

Replacing the halogen lamp/LED

CAUTION! The lamp can be hot. Risk of burns! Allow the lamp to cool
down.
1. Remove the high-speed handpiece.
2. Unscrew the cap (B).
3. Remove the defective halogen lamp/LED (A).
4. Insert the new halogen lamp/LED. Ensure the proper position of the
contact surfaces.
NOTICE! Pressing on the lens can destroy the LED. Use the
C
assembly tool (C) to insert the LED.
5. Wipe the bulb of the halogen lamp with a clean cloth.
6. Unscrew the cap from the quick coupling.
7. Check the light function of the quick coupling.
If the LED does not light up:
8 Maintenance
61