Replacing The Halogen Lamp/Led - Dentsply Sirona Midwest Stylus Plus Instrucciones De Uso

6607290.book Seite 56 Montag, 5. September 2016 11:53 11
8 Maintenance
A B
56
Operating Instructions Midwest Stylus
8.3.3

Replacing the halogen lamp/LED

CAUTION! The lamp can be hot. Risk of burns! Allow the lamp to cool
Risk of burning from lamps
down.
1. Remove the handpiece.
Handpiece
2. Unscrew the cap (B).
3. Remove the defective halogen lamp/LED (A).
4. Insert the new halogen lamp/LED. Ensure the proper position of the
C
contact surfaces.
NOTICE! Pressing on the lens can destroy the LED. Therefore,
please use the installation tool (C) provided to insert the LED.
5. Wipe the bulb of the halogen lamp with a clean cloth.
6. Unscrew the cap from the quick coupling.
7. Check the light function of the quick coupling.
Does the LED not light up?
®
Plus Air-Driven-High-Speed Handpiece
6607290 D3673.201.01.01.02