Connecting To A Network Using Another Method; Sharing The Ios Device Setting - Yamaha NP-S303 Manual De Instrucciones

Connecting to a network using another method

You can connect the unit to a wireless network without using
MUTE MUTE DIMMER DIMMER
MusicCast CONTROLLER.
Select a connection method that is suitable for your environment.
PRESET PRESET
• Sharing the iOS device setting (page 23)
1 1 2 2 3 3
• Using the WPS push button on the router (page 25)
4 4 5 5 6 6
• Manual setup (page 26)
7 7 8 8 9 9
10 10 MEMORY MEMORY HOME HOME
REPEAT REPEAT SHUFFLE SHUFFLE NOW PLAYING NOW PLAYING
You can easily setup a wireless connection by applying the
connection settings of your iOS device (iPhone) to this unit.
NET NET USB USB BLUETOOTH BLUETOOTH
Before proceeding, confirm that your iOS device is connected to a
wireless LAN router (access point).
Cursor keys
ENTER
• Performing the following procedure will initialize all network settings.
ENTER
• This configuration does not work if the encryption method of your wireless
router (access point) is WEP. In this case, use another connection method.
SETUP RETURN
RETURN
1
DISPLAY DISPLAY OPTION OPTION
SETUP
2
AMP AMP
INPUT INPUT VOLUME VOLUME
MUTE MUTE
3
4

Sharing the iOS device setting

NOTE
Press SETUP.
Use the cursor keys (/) to select "Network", and
then press ENTER.
NOTE
• To return to the previous screen, press RETURN.
Use the cursor keys (/) to select "Connection",
and then press ENTER.
Use the cursor keys (/) to select "Wireless", and
then press ENTER.
WIRELESS
¡WPS
5
Use the cursor keys (/) to select "Share
Setting", and then press ENTER.
SHARE
Wireless(WAC)
6
Press ENTER.
The connection process starts. "Connecting" appears on the
display.
NOTE
• If the unit is connected to the network by a cable, "LAN CBL Pls
disconnect" will appear on the display. Disconnect the network cable
from the unit, and then press ENTER.
7
In the Wi-Fi screen of your iOS device, select this
unit as the AirPlay speaker.
E.g., (iOS 10)
This unit's name
23
En