Manual Setup - Yamaha NP-S303 Manual De Instrucciones

MUTE MUTE DIMMER DIMMER
PRESET
PRESET
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
10 10 MEMORY MEMORY HOME HOME
REPEAT REPEAT SHUFFLE SHUFFLE NOW PLAYING NOW PLAYING
NET NET USB USB BLUETOOTH BLUETOOTH
Cursor keys
ENTER
ENTER
SETUP RETURN
RETURN
DISPLAY DISPLAY OPTION OPTION
SETUP
AMP AMP
INPUT INPUT VOLUME VOLUME
MUTE MUTE
26
En

Manual setup

You can connect this unit to a wireless network manually. Before
performing the following procedure, verify the encryption method
and security key for the wireless LAN router (access point).
1
Press SETUP.
2
Use the cursor keys (/) to select "Network", and
then press ENTER.
NOTE
• To return to the previous screen, press RETURN.
3
Use the cursor keys (/) to select "Connection",
and then press ENTER.
4
Use the cursor keys (/) to select "Wireless", and
then press ENTER.
5
Use the cursor keys (/) to select
"ManualSetting", and then press ENTER.
MANUAL
¡SSID
6
Use the cursor keys (/) to select "SSID", and
then press ENTER.
SSID
¡
7
Use the cursor keys to enter the SSID for the
wireless LAN router (access point), and then press
ENTER.
Use the cursor keys (/) to select a character. Use the
cursor keys (/) to move the edit position.
You can insert or delete a character by pressing PRESET >
(insert) or PRESET < (delete).
8
Use the cursor keys (/) to select "Security", and
then press ENTER.
SECURITY
¡WPA2-PSK(AES)
9
Use the cursor keys (/) to select the desired
encryption method, and then press ENTER.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
NOTE
• If you select "None", the connection might not be completely secure
since communications will not be encrypted.
10
Use the cursor keys (/) to select "Security Key",
and then press ENTER.
KEY
11
Use the cursor keys to enter the security key for the
wireless LAN router (access point), and then press
ENTER.
If you select "WEP" in Step 9, enter either a 5 or 13-character
string; or a 10 or 26-digit hexadecimal number.
If you select "WPA2-PSK (AES)" or "Mixed Mode", enter either
an 8 to 63-character string; or a 64-digit hexadecimal number.
Use the cursor keys (/) to select a character. Use the
cursor keys (/) to move the edit position.
You can insert or delete a character by pressing PRESET >
(insert) or PRESET < (delete).