Connecting The Power Cord; Turning On The Power To The Unit; Turning On The Power To The Unit For The First Time - Yamaha NP-S303 Manual De Instrucciones

3

Connecting the power cord

After all the connections are complete, connect the supplied power cord to the AC IN
jack on this unit, and then plug into a home AC outlet.
power cord (supplied)
This unit (rear)
AC IN
* Illustration above shows Europe model.
20
En
To an AC wall outlet
4

Turning on the power to the unit

To turn on the power to the unit, press z (power) on the front panel.
USB
5V A
z (power)

Turning on the power to the unit for the first time

When you turn on the power to the unit for the first time after you purchase or initialize it,
the unit will indicate "WAC" on the display, and share the network settings of the iOS
device (iPhone) to connect to a wireless network (unless the unit is already connected
to a wired network).
If you use this function, proceed to Step 7 in "Sharing the iOS device setting" (page 23).
If you connect the unit to a wireless network using another method, press RETURN and
proceed to the next page.
WAC (Wireless Accessory Configuration)
WAC
NP-S303 XXXXXX
SELECT
ENTER PUSH
SOURCE RETURN
Wi Fi
BLUETOOTH
CONNECT